13-05-2021

Bmw Standard Tools 2.11 Download

Free Download BMW Standard Tools 2.12 coding software

BMW Standard Tools is the software suite distributed by BMW Group that contains several interoperating applications and drivers, including NCS Expert, WinKFP, NFS, INPA, Tool32, and others. Here is the free download link for V2.12.
Hardware:
A PC (Operating system: Win XP 32 bit /VMware Win 7 32 or 64 bit) An INPA/EDIABAS K+DCAN USB Diagnostic cable (cheap €19 in eobd2.fr)
How to setup BMW Standard Tools 2.12?

Step 1: Download BMW Standard Tools 2.12
Download here and install follow system prompts:
http://www.mediafire.com/download/qldyddn48ffzrwn/BMW+Standard+Tools+2.12.rar
Step 2: Download and install INPA
http://www.maxdown.org/download.php?file=BMW%20Inpa/Ediabas%20v5.06&host=b
Step 3: Download and install NCS Expert ENG
Download NCS-Expert software here and install
http://www.mediafire.com/download/en2xcszq46vaipm/NCSEXPER32_ENG.zip
Step 4: Download and configure INPA K+DCAN cable
Make sure your EDIABAS should already be configured to STD:OBD for use with INPA cable.
Download EDIABAS configurator here:
http://www.mediafire.com/download/x1r66eesv14lx88/ediabas+konfigurator2.0.0.exe
This tool (in C:EDIABASEdiabas-Konfigurator folder) allows you to easily change the ediabas.ini to your desired interface. So if you are switching from INPA to E-Sys you could use this to switch from STD:OBD to ENET. Set COM port for INPA cable Connect the INPA DCAN cable with PC
Install device deriver Come to My Computer>>Device Manager>>Ports (COM&LPT) In this case it's COM5. We need to change this in the obd.ini file located in the c:ediabasbin folder. Right click on your INPA cable driver for example mine is labeled 'USB Serial Port' and click on properties. Now in the property window click on the advanced tab.
Now every driver is different but the important part is the settings such as latency timer and received and transmit bytes. See pic bellow for the ideal settings. You may also change the COM port number here as well for tutorial I left it at 5. Once your changes are done we can proceed by clicking OK to accept the changes. No close all windows to return to the desktop.
Step 5: Change the OBD Browse to C:EDIABASBIN and find file obd.ini and open it with an editor (e.g Notepad) First 3 lines will look like this... [OBD] Port=Com1 Hardware=USB Need to change the Port to reflect our INPA cable which in our case is COM port 5. So change it to look like this... [OBD] Port=Com5 Hardware=USB When done click File -> Save and exit
NOTE: Remember which USB port you connected your cable to as plugging it into a different USB port will allocate the INPA cable to a different COM port and neither tool will see the cable until the original USB port is used again or changed in device manager and obd.ini as mentioned above.Now to test if your cable installed correctly. Plug it into the vehicle's OBD port and open INPA.
Step 6: SPDATEN Files Download and install SPDaten files (always recommend the latest)
in this case it is 50.2 until I finish zipping and upload SPDatens 51.0 and upload it to share. (Follow the instructions provided at the end of the blog labeled 'How to start WinKFP' which will explain how to import the SPDaten files to WinKFP)
Once downloaded you can now
**EDITED 10-12-2013**
For NCSExpert to install or update the daten files, copy the files from SP-daten-E##daten to the C:NCSEXPERDATENE## (where E## is whatever chassis you're updating). You will also want to copy the files from SP-daten-E##SGDAT to C:NCSEXPERSGDAT (they're not separated into different chassis in NCS Expert, so you just want to copy and paste everything to that directory. Overwrite everything it asks about). Then copy the files from SP-daten-E##ECU to C:EDIABASECU
After copying the daten files to c:NCSEXPERDATENE## copy the following files to the following locations:
copy C:NCSEXPERDATENE##*.000 C:NCSEXPERDATEN copy C:NCSEXPERDATENE##*.DAT C:NCSEXPERDATEN copy C:NCSEXPERDATENE##*.ASC C:NCSEXPERDATEN
PS: How to start WinKFP?
1. Install WinKFP and come to direction
2. After installation the directory (Drive letter):EC-APPSNFSSGDAT contains file CABI.h only, and doesn’t contains files, required for working.
3. Mount the Progman disk in virtual drive (or insert in usual DVD-drive), extract all files SP-daten-Exx.rar from directory (Drive letter):CIP-Installerbin, each one in its own directory. (You must get directories like SP-daten-Exx)
4. Now copy all *.IPO files from every directory (Drive letter):SP-daten-Exxsgdat to directory (Drive letter):EC-APPSNFSSGDAT. For this purpose better use Total Commander, it allows to overwrite elder files with newest. This directory now looks like this:
5. In the same way refresh directory (Drive letter):EDIABASEcu with files taken from (Drive letter):SP-daten-Exxecu 6. Run WinKFP
6. Run WinKFP software
7. Choose “Import/Export – Import – Assemly line data” and import all data needed from directories (Drive letter):SD-daten-ExxDATA Details how to import assembly line data are given in official manual for WinKFP
8. After importing the data, copy all files from directory (Drive letter):SD-datenE70DATAgdaten to directory (Drive letter):EC-APPSNFSDATAGDATEN, overwriting all existing files.
Note: If you use Progman v.30 for updating WinKFP, it has error in file GDATENSgidc.as2. Simply open this file with Notepad and delete line 165.
WinKFP is ready for programming

What is StandardToolsSetup2.11.0.exe? StandardToolsSetup2.11.0.exe is known as BMW Standard Tools and it is developed by BMW Group. We have seen about 1 different instances of StandardToolsSetup2.11.0.exe in different location. So far we haven't seen any alert about this product.

Sep 13, 2017 BMW INPA software new update, BMW INPA Cable with BMW INPA Software for BMW E serial programming.here eobdtool.com share full BMW INPA software 5.0.6 download BMW INPA software for F and E series models. BMW INPA Software 5.0.6 do not test, pls try it for INPA cable by your own risk. BMW INPA software download, free: BMW Standard Tools and INPA.
Hy at all members for download the BMW STANDARD TOOLS 2.11.0, look on garageforum.co.uk, or pm me for the link. Best Regard Davide.

BMW Standard Tools is the softwaresuite distributed by BMW Group that contains several interoperatingapplications and drivers, including NCS Expert, WinKFP, NFS, INPA, Tool32, and others. Here is the free download link for V2.12.

Hardware:

A PC(Operating system: Win XP 32 bit /VMware Win 7 32 or 64 bit)

An INPA/EDIABASK+DCAN USB Diagnostic cable (cheap €19 in obdtool.co.uk)

How to setup BMW Standard Tools 2.12?

http://www.mediafire.com/download/qldyddn48ffzrwn/BMW+Standard+Tools+2.12.rar

http://www.maxdown.org/download.php?file=BMW%20Inpa/Ediabas%20v5.06&host=b

Download NCS-Expert software here and install

http://www.mediafire.com/download/en2xcszq46vaipm/NCSEXPER32_ENG.zip

Makesure your EDIABAS should already be configured to STD:OBD for use with INPAcable.

http://www.mediafire.com/download/x1r66eesv14lx88/ediabas+konfigurator2.0.0.exe

This tool (in C:EDIABASEdiabas-Konfiguratorfolder) allowsyou to easily change the ediabas.ini to your desired interface. So if you areswitching from INPA to E-Sys you could use this to switch from STD:OBD toENET.

Set COMport for INPA cable

Connect theINPA DCANcable with PC

Come toMy Computer>>Device Manager>>Ports (COM&LPT)

In this case it's COM5. We need to change this in the obd.ini file locatedin the c:ediabasbin folder.

Right click on your INPA cable driver forexample mine is labeled 'USBSerialPort'and click on properties. Now in the property window click on the advanced tab.

Now every driver is different but theimportant part is the settings such as latency timer and received and transmitbytes. See pic bellow for the ideal settings. You may also change the COM portnumber here as well for tutorial I left it at 5. Once your changes are done wecan proceed by clicking OK to accept the changes. No close all windows toreturn to the desktop.

Browseto C:EDIABASBIN and find file obd.ini andopen it with an editor (e.g Notepad)

First 3 lines will look like this...

[OBD]
Port=Com1
Hardware=USB

Need to change the Port to reflect our INPA cable which in our caseis COM port 5. So change it to look like this...

[OBD]
Port=Com5
Hardware=USB

NOTE: Remember which USBport you connected your cable to as plugging it into a different USB port willallocate the INPA cableto a different COM portand neither tool will see the cable until the original USB port is used againor changed in device manager and obd.ini as mentioned above.Now to test if yourcable installed correctly. Plug it into the vehicle's OBD port and openINPA.

Step 6: SPDATEN Files

Download and install SPDaten files (alwaysrecommend the latest) in this case it is 50.2 until I finish zipping and uploadSPDatens 51.0 and upload it to share. (Follow theinstructions provided at the end of the blog labeled 'How to start WinKFP' which will explain how to import the SPDaten filesto WinKFP)

Once downloaded you can now

**EDITED 10-12-2013**

Bmw Standard Tools Setup

For NCSExpert to install or update thedaten files, copy the files from SP-daten-E##daten tothe C:NCSEXPERDATENE## (where E## is whatever chassis you'reupdating). You will also want to copy the filesfrom SP-daten-E##SGDAT to C:NCSEXPERSGDAT (they're notseparated into different chassis in NCS Expert, so you just want to copy andpaste everything to that directory. Overwrite everything it asks about). Thencopy the files from SP-daten-E##ECU to C:EDIABASECU

After copying the daten files toc:NCSEXPERDATENE## copy the following files to the following locations:

copy C:NCSEXPERDATENE##*.000C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.DAT C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.ASC C:NCSEXPERDATEN

PS: How to start WinKFP?

1.Install WinKFP and come to direction

2. After installation the directory (Drive letter):EC-APPSNFSSGDATcontains file CABI.h only, and doesn’t contains files, required for working.

Bmw Standard Tools 2.11 Download For Windows 10

3. Mount the Progman disk in virtual drive(or insert in usual DVD-drive), extract all files SP-daten-Exx.rar fromdirectory (Drive letter):CIP-Installerbin, each one in its own directory.(You must get directories like SP-daten-Exx)

Bmw Standard Tools Download

4. Now copy all *.IPO files from everydirectory (Drive letter):SP-daten-Exxsgdat to directory (Drive letter):EC-APPSNFSSGDAT.For this purpose better use Total Commander, it allows to overwrite elder fileswith newest. This directory now looks like this:

Bmw Standard Tools 2.12 Download

5. In the same way refresh directory (Driveletter):EDIABASEcu with files taken from (Drive letter):SP-daten-Exxecu 6.Run WinKFP

Bmw Standard Tools 2.11 Download For Mac

7. Choose “Import/Export – Import – Assemlyline data” and import all data needed from directories (Driveletter):SD-daten-ExxDATA Details how to import assembly line data are givenin official manual for WinKFP

Bmw Standard Tools 2.11 Download For Android

8. After importing the data, copy all filesfrom directory (Drive letter):SD-datenE70DATAgdaten to directory (Driveletter):EC-APPSNFSDATAGDATEN, overwriting all existing files.

Bmw Tools Download

Note: If you use Progman v.30 for updatingWinKFP, it has error in file GDATENSgidc.as2. Simply open this file withNotepad and delete line 165.

WinKFP is ready for programming